[specifications] [PDF]
The CF3 series is available in two bed sizes. 1,600 x 3,1000 (CF3-1610) and 1,600 x 1,000 (CF3-1610)
Supports both small and large size media up to 1.6m x 3.1m (63" x 122"). Even different acrylic or aluminium composite panels can be cut with consistantly high accuracy. User exchangeable cutting heads to suite a wide range of conditions greatly increase your possibilities.
M head (router)
The M head is used exclusively for router cutting. With a high-speed spindle, rigid materials such as acrylic or aluminium composite panels can be cut easily, even up to 50mm in thickness. The cut depth control function enables multiple cuts for especially thick materials.
Spindle speed 60,000rpm
Tool chuck collect type
Maximum tool diameter 6mm (0.24")
Main materials rigid materials such as acrylic and aluminium composite panels
Set tool endmill
R1 head (reciprocating cutter)
Thick materials up to 20mm (0.78") can be cut with the reciprocating cutter. The R1 head is equipped with a material-holding unit, which prevents cut materials from lifting. The cutting head is suitable for cutting corrugated boards and foam materials.
Maximum reciprocating speed approx: 10,000 strokes/min
Stroke 1mm (dependent on the cutter and holder used)
Mazimum cut depth 20mm (dependent on the cutter and the holder used)
Main materials cardboard, currugated board, foam material
Set tool swivel cutter/pen, reciprocating cutter creasing tool, high-pressure tangential cutter
TF2 head (tengential cutter)
The tangential cutter steers the blades as it cuts. With two types of tangential cutters and fine cut pressure settings a wider range of materials can be cut successfully. Varous cutting tools are provided for a range of materials.
Vertical tool force low-pressure head: 300-1,500g
high-pressure head:1,000-5,000g
Main materials reflective sheet, rubber, industrial materials
Set tool swivel cutter/pen, tagential cutter creasing tool and high-pressure tangential cutter
The CF3 seris cuts printed materials with high accuracy to satisfy your needs and creativity. Mimaki's latest cutting technology provides versatile solutions for a wide range of cutting jobs.
Colour photo sensor Media is firmly held by vacuum system
The patented Mimaki colour photo sensor on the CF3, reads registration marks that are printed on the media to obtain more precision by automatic correction of alignment and distances.
The vacuum area is devided into zones, 6 for the CF3-1631 and 2 for the CF3-1610. The zones can be seperately activated to suite the media size. The vacuum system also incorporates a blower function for easier positioning of heavy media.
Sensor
Easily hold down different size materials
According to the size of the media a number of zones can be activated to optimise vacuum.

The blower function enables easy handling of heavy materials
The blower function (reversing the air stream) can be activated to easily position, replace and move heavy media.

Automatic cleaning of the table surface
Blowing away the dust is essential for the router to move smoothly. The automatic cleaning function selects the area to be cleaned from a total of 8 sections. This automatic feature not only enhances reliability but also saves post cutting labour costs.
The automatic cleaning function only applies to the M head (router)
By recognising the difference between the colour of the media and of the registration marks, the position of the registration marks is correctly detected regardless of the colour of the media.
Light pointer
The registration marks can be located easily. The light pointer can also be used to precisely position the media on the bed.
Print and Cut
Together the CF3 series and the JF series form a powerful print and cut soloution for small, medium size and large rigid media.
4-point adjustment
By detecting 4 registration marks and adjusting alignment and distance, precise contour cutting of complex shapes is enhanced.
printers | cutters | software | consumables | laminators | heat units | filters | FAQs | downloads | contact us
©Copyright 2008 DGS Mimaki