consumables
• Cutter
Item CG-130SRII
Acceptable sheet width
90mm (3.54") to 1,550mm(61.0")
Effective cutting area *1
1,370 (53.9')
Maximum cutting speed
85cm/s (33.3"/s) at an angle of 45º
Adjustable speed range *2
1 - 10cm/s : 1cm step adjustment (0.39" - 3.94"/s : 0.39" step adjustment)
10 - 60cm/s :5cm step adjustment (3.94" - 23.6" step adjustment)
Repeatability
0.2mm (Excluding shrinkage / expansion caused by the film temperature)
Effective Repeatability
1,350mm x 2m
Pen pressure
400g
Range of down pressure Cutter
10 - 20g (2g step), 20 - 100g (5g step), 100 - 400g (10g step)
Pen
10 - 20g (2g step), 20 - 100g (5g step), 100 - 150g (10g step)
Acceptable sheet *3
Vinyl up to 0.25mm (0.01") thickness, fluoescent type vinyl, reflective sheet
Applicable tools *4
Cutter, water based ball-point pen, oil based ball-point pen, pouncing tool
Type of command
MGL-Ic1
Interface
RS-232C, USB
Received buffer size
30MB Standard
Operational
Environment		 Temperature
5°C (41°F) - 35°C (95°)
Humidity
35 - 75% Rh (no condensation)
Power requirements
AC 100V - 240V
Power consumption
Less than 120VA
External Dimensions (W x D x H)
1,735mm (68.3")
x 580mm (22.8")
x1,125mm (44.3")
Weight (with stands)
44kg (97lbs)
*1: Maximum sheet feeding length differ depending on the software
*2: Restricted sheet width
*3: Provided that the blade specific to flurescent type vinyl (SPB-0007) and the blade specific to reflective sheet (SPB-0006) are used.
*4: The goods on the market are Ø8 -Ø9 pen. No Garranty with accuracy and image quality.
• Optional tools and accessories
Item CG-130SRII
Cutter holder
SPA-0090
Pen Adaptor
SPB-0169
Pen-line rubber
SPC-0599
Roll shaft
OPT-C0224
Sheet basket
OPT-C0222
• Variety of blades
Item CG-130SRII
Vinyl
SPB-0030
Reflective sheet
SPB-0006
Fluorescent sheet
SPB-0007
Rubber Sheet
SPB-0005
Vinyl sheet and paper
SPB-0001
Small characters
SPB-0003
©Copyright 2012 DGS Mimaki
printers | cutters | software | consumables | laminators | heat units | filters | FAQs | downloads | T&C | contact us