• Cutters
Item CG-75FX CG-130FX CG-160FX
Acceptable sheet width
90mm (3.54") to
1,040mm(40.9")
90mm (3.54") to
1,580 (62.")
90mm (3.54") to
1,880mm (74")
Acceptable roll sheet
Outer less than Ø200mm, roll weight less than 18kg
Roll weight less than 22kg
Effective cutting area *1
760mm (29.9")
x 51m (167')
1,300mm (51.2")
x 51m (167')
1,600mm (62.9")
x 51m (167')
Maximum auto cutting width *2
870mm (34.2")
1,425mm (56.1")
1,720mm (67.7")
Maximum cutting speed
100cm/s (39.3"/s)
Maximum moving speed
140cm/s (55"/s)
Adjustable speed range *3
1cm/s (0.39"/s) -10cm/s (3.94"/s) : 1cm (0.39") step adjustment
10cm/s (3.94"/s) - 50cm/s (19.68"/s) : 5cm (2") step adjustment
50cm/s (19.68"/s) - 100 (39.37"/s) : 10cm (3.94") step adjustment
Mechanical resolution
5µm (0.0002")
Command resolution
25µm (0.001") or 10µm (0.0004") -MGL-IIc
Repeatability
±0.2mm (Excluding shrinkage / expansion caused by the film temperature)
Pen pressure
400g
Range of down pressure Cutter
10 - 20g (2g step), 20 - 100g (5g step), 100 - 400g (10g step)
Pouncing
Pen
10 - 20g (2g step), 20 - 100g (5g step), 100 - 150g (10g step)
Acceptable sheet *4
Vinyl up to 0.15mm (0.006") thickness, fluoescent type vinyl reflective sheet
Acceptable sheet for pouncing *5
Paper thickness: 0.06mm (0.0024") - 0.13mm (0.005")
Applicable tools *6
Cutter, water based ball-point pen, oil based ball-point pen, pouncing tool
Type of command
MGL-IIc
Interface
RS-232C, USB
Received buffer size
30MB Standard (20MB when sorting)
Operational
Environment
Temperature
5°C (41°F) - 35°C (95°)
Humidity
35 - 75% Rh (no condensation)
Power requirements
AC 100V - 240V
Power consumption
Less than 130VA
External Dimensions
1,125mm (83.6")
x 700mm (27.5")
x1,217mm (47.9")
1,825mm (78.8")
x 700mm (27.5")
x 1,217mm (47.9")
2,285mm (50.5")
x 700mm (27.5")
x 1,217mm (47.9")
Weight (with stands)
50kg (110lbs)
60kg (132lbs)
69kg (152lbs)
*1: Maximum sheet feeding length differ depending on the software
*2: Sheet width to cut off from the roll
*3: Restricted sheet width
*4: Provided that the blade specific to flurescent type vinyl (SPB-0007) and the blade specific to reflective sheet (SPB-0006) are used.
*5: Pouncing tool intended speciffically for pouncing shall be used.
*6: The goods on the market are Ø8 -Ø9 pen. No Garranty with accuracy and image quality.
• Optional tools and accessories
Item CG - 75FX CG - 130FX CG - 160FX
Cutter holder
SPA-0090
Blade for sheet cutter
SPA-0119
Pouncing set
OPT-C0095 (Holder x 1, Needle x 2)
Pen-line rubber
SPC-0358
SPC-0353
SPC-0381
Pen-line sponge
SPC-0359
SPC-0354
SPC-0382
Roll set
OPT-C0185
OPT-C0183
OPT-C0187
Sheet basket
OPT-C0184
OPT-C0182
OPT-C0186
• Variety of blades
Item CG - 75FX CG - 130FX CG - 160FX
Vinyl
SPB-0030
Reflective sheet
SPB-0006
Fluorescent sheet
SPB-0007
Vinyl sheet and paper
SPB-0001
Small characters
SPB-0003
printers | cutters | software | consumables | laminators | heat units | filters | FAQs | downloads | register | contact us
©Copyright 2009 DGS Mimaki