Item
DS-1600
 DS-1800
Print head Method
Piezo-electric drop-on demand
Nozzle Configuration
Eight heads (4 x 2 lines, stagger arrangement)
Resolution
360, 540, 720 dpi
Maximum printing width
1,620mm(63.7")
1850mm (72.8")
Head height adjustment
1.2mm (0.04") to 10mm (0.39")
Printing
4-Colours
6-Colours
Nozzle
360 nozzels per colour
180 nozzles per colour
Print mode
(1*)		 6-colour printing
360 x 360 dpi: 2/4/8 pass Bi/Uni directional
360 x 540 dpi: 3/6/12 pass Bi/Uni directional
360 x 720 dpi: 4/8/16 pass Bi/Uni directional
720 x 720 dpi: 4/8/16 pass Bi/Uni directional
4-colour printing
360 x 360 dpi: 1/2/4 pass Bi/Uni directional
360 x 540 dpi: 3/6/12 pass Bi/Uni directional
360 x 720 dpi: 2/4/8 pass Bi/Uni directional
720 x 720 dpi: 2/4/8 pass Bi/Uni directional
Ink type Dye Sublimation
C, M, Y, K, Lc, Lm
Aqueous Pigment
C, M, Y, K
Ink Volume
(2*)
6 colour print 1-way: 220cc x 2/colour, 2-way: 220cc x 1/colour
4 colour print 1-way: 220cc x 4/colour, 2-way: 220cc x 2/colour
Media Type
Polyester / Cotton (3*)
Width
200mm (7.8") - 1650mm (64.9")
200mm (7.8") - 1900mm (74.8")
Thickness
Less than 7mm (0.27")
Outside diameter
Less than Ø250mm (9.84")
Roll weight
Less than 30kg (66lbs)
Roll inside diameter
1.5" - 3"
Printing surface
Printing is possible on either sides
Roll end treatment
Light adhesive tape is used to allow media to be removed
Margin (roll fabric)
10mm (0.39") ±0.5mm (0.01"), left and right side
Interface
IEEE-1284 / IEEE-1394
Command
MRL-1E (ESC/PV.1 base) Mimaki original command
Power requirement
AC100V to 240V ±10%, (auto voltage) 50/60Hz±1Hz
Power consumption
Less than 500W
Operational Environment
Temperature: 15°C (55°F) to 30°C (86°F) Humidity: 35% to 65%Rh (no condensation)
Dimentions Width
2750mm (108.3")
3040mm (119.7")
Depth
940mm (37.0")
Height
1350mm (53.2")
Weight
230Kg(507lbs)
250kg (551lbs)
(1*) Some combinations of pass drawing direction, scan speed and resolution may not be supported.
(2*) Capacity of textile ink cartridge is 210cc
(3*) Any fabric that expands/shrinks with moisture or stretches cannot be used
printers | cutters | software | consumables | laminators | heat units | filters | FAQs | downloads | contact us
©Copyright 2008 DGS Mimaki