| [specifications] [PDF] | |||||||||||||||||||
 |
|||||||||||||||||||
 |
|||||||||||||||||||
|
Always striving for the best, Mimaki has achieved significant productivity enhancements for its flatbed UV LED printer series JFX with up to 80 % higher speeds. The new JFX plus series features a standard post-curing unit that enables printing of up to 23.6 sqm/h. This is nearly twice as fast as previous models. A roll unit has been developed to boost efficiency and productivity when printing on roll fed substrates. In addition, Mimaki's IMS* technology ensures the highest image quality exceeding your customers' expectations.
* IMS=Intelligent Microstepping System |
|||||||||||||||||||
As standard, JFX plus series is now equipped with a post-curing unit that cures the print after its first exposure by UV LEDs thus enabling nearly double the print speed as previous models. Print service providers can now cater to their clients' needs for fast turnarounds, quick changes and short run orders while at the same time increasing productivity and efficiency. Print Speeds
*Print speed varies according to substrate. Post-curing unit 
Please note that when using the post-curing unit for high speed printing and curing, maximum print size is shortened by 150 mm (front), 250 mm (back) and 400 mm (total). The printer automatically switches sizes when post-curing is selected. Therefore please make sure to adhere to the maximum print sizes according to your selected print and curing mode.
The new UV LED curing technology does not emit infrared rays thus eliminating thermal deformation of the media. The UV LED technology enables print on heat sensitive materials such as acrylic and styrene panels. Due to its low operation temperature, users have a broader choice of media. This results in the creation of the new and exciting applications on up to 50mm thick substrates.
* As ink expansion of LF-200 ink varies according to the substrate, please verify your substrate in advance.
White ink underprint prevents the transmission of light, resulting in more vivid images.
Glossy or matte finishing varnish with clear ink* realizes astounding and eye-catching effects on your prints. Depending on your design, you can add protective coating to protect surface or spot coating for design accents.
By printing several layers of ink and/or gloss, your images will not only look more enticing but also will have a tactile feel that will satisfy your clients. |
|||||||||||||||||||
The new head positioning mechanism uses high resolution linear scale for fine step accuracy of dot placement. This results in far fewer banding artifacts and even the possibility to print legible 3pt characters.
 High image quality is achieved by utilizing a resolution of up to 1200 x 1200 dpi and variable dot sizes. Even printing in 4-colour mode realizes a non-grainy print, thus prints show smooth gradations and highly detailed images. Variable dot technology
While printing on rigid substrates up to 50 mm thickness is standard, JFX plus also answers the demand of print service providers for hybrid printing on roll media. An optional roll unit is available that enhances productivity and efficiency by accommodating unattended printing of several or different jobs* enabling fast turnaround times.
|
|||||||||||||||||||
 |
|||||||||||||||||||
Almost no VOCs are generated by UV curing print. In addition, diodes that are used for Mimaki's UV LED system feature a long lifetime and are using considerably less power than conventional UV lamps. Furthermore by using Mimaki's Eco-cartridge system, waste is reduced as the ink pack inside of the cartridge casing needs to be replaced.
