[specifications] [PDF]
JV33
Speed
Quality
Affordability
Overcoming the previously held misconceptions about solvent inkjet printers, the JV3 series has achieved enormous popularity ever since its release. Following in the footsteps of this revolutionary machine, the JV33 series was created. In addition to various enhancements which bring out a high quality print of 1,440 dpi, the new JV33 series has increased print speed. With it's compact design and affordable price, the JV33 series is an attractive option for any shop. Mimaki's flagship product has established high standards which set it apart from the competition.
High resolution, high speed. USB 2 Interface
A newly developed high-speed print head containing 180 nozzles x 8 lines, allows for ease of assembly and calibration. With it's increased print head accuracy the JV33 delivers truly high quality print of 1,440 dpi. In addition, the improved running efficiency has improved the print speed by 30% over the JV3 series. Print quality in 4-color bidirectional mode is also improved using a "symmetric ink arrangement".		 High speed data transfer is now achievable with USB 2 as the default form of communication.
Model
High speed mode
540x720dpi 4pass
Bi-directional
Standard mode
540x1080pdi 6 pass
B-directional
High quality mode
720x1440dpi 8 pass
Bi-directional
JV33-260
4 colour
18.3 sqm/hr
12.7 sqm/hr
7.7 sqm/hr
6 colour
9.7 sqm/hr
6.6 sqm/hr
3.6 sqm/hr
JV33-160
4 colour
17.5 sqm/hr
11.9 sqm/hr
7.4 sqm/hr
6 colour
9.0 sqm/hr
6.1 sqm/hr
3.4 sqm/hr
JV33-130
4 colour
16.7 sqm/hr
11.4 sqm/hr
7.1 sqm/hr
6colour
8.6 sqm/hr
5.8 sqm/hr
3.2 sqm/hr
Uninterrupted Ink Supply Sustem
UISS for continuous printing is standard on JV33 machines. The JV33 can utilize two cartridges per color in 4-color mode. When the ink cartridge runs out, another cartridge begins supplying ink and helps prevent running out of ink. A maximum of 880cc ink per color can be loaded at one time. With 880cc of ink loaded at one time, a 50m (54yd) roll of media can be printed without interruption. Ink cartridges can be changed during printing.
*UISS can not be used in 6-color mode.
Green LEDs indicate current cartridges in use. Red indicates cartridges that need replacing. The printer will automatically switch between empty and new cartridges to allow ofr continuous printing.
High volumes and lower ink costs. MBIS (Mimaki Bulk Ink System) Automatic Media Feeder AMF (JV33-260)
The bulk ink system using ink packs of aluminum achieves as stable and reliable ink ejection as printing solely with cartridges. It is possible to use both 2-litre ink packs in combination with 220/440cc cartridges for colours that are net so often used. Ink-end detection function to prevent misprints without ink is also available. The bulk ink system is an eco-friendly ink system that produces less waste while achieving continuous printing.
[more]		 The feeding and take-up device can securely feed heavy media with maximum width of 2.6m (103"). Heavy media up to 100kg (220lbs) can be fed with constant tension by means of the tension bar and the winding device. For less wide and lighter media, a standard take-up device is also available.
Variable dot technology Improve ink performance with triple stage heater
By producing dots in three different sizes, smooth high resolution graphics are created without a grainy appearance. Even at high speed and in low resolution mode high qualiti printing possible.
Simultaneous fulll colour and white printing.
Mimaki's exclusive 'White ink Overlay print' allows for simultaneous white and full colour print and realises a beautiful finish with accurate overlay. Print with white ink onto transparent or opaque substrates creates vivid full colour graphics.
A triple stage intelligent heater automatically heats up the media to the appropriate temperature, thus improving the performance of ink. A newly mounted Post-heater quickens drying time and thus enables a fast take-up of the media.
Multi-point grid roller system
Securely holds media in place for more accurate and secure media feed. Tis works especially well for long prints.
Four types of ink are available to meet all your printing needs, including aqueous inks.
The two solvent inks feature high scratch resistance, high density, wide colour gamut and high safety (Cyclohexanon-free). You may also select aqueous pigment ink or dye sublimation ink at the time of installation.
Drying speed is increased. Automatic drying fan (option)
A solvent ink meeting the needs for high scratch resistance and high-speed high-density printing required for outdoor signboard printing.
Drying speed can be improved with the use of a post heater. The take-up reel can be used even when printing at high speed, improving efficiency and work flow.
Fast dying industrial grade heavy duty ink provides the ability to print on a broad range of media with high scratch & alcohol rub resitants. Ideal for the professional Sign Makers
Comfortable, oder-less work environment. Exhaust vents to help ventilate working spaces more effectively (option)
Vitually odorless and user- friendly ink Completely waterproof. Ideal for the Home & Office enviroment.
Completely odorless no VOC with high light fastness very vivid colour gamut and delicate tones. Prints on a wide range of coated medias For best outdoor durability overlamination is required
Exhaust fans attached to the front and exhaust-ducts on the back help removing fumes effectively. A curtain attached to the front of the machine reduces the spread of printing exgaust and help removing fumes effectively.
Completely odorless no VOC Fast drying ink for sublimation transfer to polyester materials. Ideal Flags Banners & Sport wear
RasterLink ProIII comes standard with the Mimaki JV33 printer
Smooth gradients with 16-bit rendering
Tonal jump or 'stepping' may appear in gradients when using only 8-bit rendering. RasterLink ProIII now using 16-bit rendering allows for ultra smooths gradients.
[more]
8-bit rendering
16-bit rendering
printers | cutters | software | consumables | laminators | heat units | filters | FAQs | downloads | register | contact us
©Copyright 2009 DGS Mimaki