Item
JV5-130S
JV5-160S
Print head Method
Piezo-electric drop-on demand (4 staggered print heads array)
Maximum printing width
1361mm (53.5")
1610mm (63.3")
Print mode
( ) pass is available in 4 colour
Resolution
540, 720, 1440dpi
720x540dpi
6/12 pass Bi/Uni directional
540x900dpi
10/20 pass Bi/Uni directional
540 or 720x720dpi
(4)/8/16 pass Bi/Uni directional
540 or 720x1080dpi
(8)/12 pass Bi/Uni directional
720x1440dpi
(8)/16 pass Bi/Uni directional
1440x1440dpi
(16)/32 pass Bi/Uni directional
Ink Type
ES3, HS
Colour
Yellow, Magenta, Cyan, Black, Light Magenta, Light Cyan
Supply
Automatic change of double ink cartridges
Ink Volume
6/8 colour print mode: 440cc or 220cc cartridge x 2 = 880cc or 440cc per colour
4 colour print mode: 440cc or 220cc cartridge x 4 = 1, 760cc or 880cc per colour
Media Max. width
1, 375mm (54.13")
1, 630mm (64.17")
Min. width
297mm (11.6")
297mm (11.6")
Roll weight
less then 38kg (83.7 lbs.)
Print Surface
Face Out
Roll diameter
Inner: 2 inches, 3 inches/ Outer: less then Ø200mm (7.87")
Media cutting
Cutting in Y direction by cutter at head
Media Heater
Three-way intelligent heater (PRE/PRINT/POST)
Media take-up device
Standard take-up device (inside/outside selectable)
Nozzle cheaking unit (NCU)
Laser system
Head height
1.5mm to 7mm (Media thickness is automatically detected)
Interface
USB 2.0
Applicable standards
VCCI Class A, FCC Class A, UL 60950
CE Marketing (EMC Directive, Low Voltage Directive), CB Report, Rohs
Power specifications
AC200 to 240±10%, 50/60Hz±1Hz, 15A or less
Power consumption
Less than 3,600VA
Operational Environment
Temperature: 20°C (56°F) to 35°C (95°F) Humidity: 35% to 65%Rh (no condensation)
Dimentions
W=2,860mm (112.6") x
D=1,200mm (47.3") x
H=1,551mm (61.1")
W=3,120mm (122.9") x
D=1,200mm (47.3") x
H=1,551mm (61.1")
Weight
Less than 270Kg(595lbs)
Less than 290Kg(639lbs)
printers | cutters | software | consumables | laminators | heat units | filters | FAQs | downloads | contact us
©Copyright 2008 DGS Mimaki