[specifications] [pdf]

Tx3 Direct to textile Packed with production features

Fabric Path Configuration Diagram

Washing Mechanism

The convoyer belt can be washed with water and a brush through direct connection to a water supply exhaust system. Washing through the use of a simple water circulation system is also possible.

Drying Mechanism

Supply Mechanism

Once the fabric has been printed it can be dried with a heater, reducing reverse side bleeding during take-up.

The supply mechanism is capable of feeding large-diameter heavy fabric. Moreover, this mechanism also supports thin materials or stretchable materials by sticking to the belt with a constant tension. The tension can be adjusted according to the fabric's weave, thickness, and stretchability.

Take-up Mechanism

Both face-in take-up and face-out take-up can be selected according to the process after printing. Winding up tp 38kg, 270mm external diameter is possible.

Wrinkle Removal Mechanism

The wrinkle removal roller stretches the fabric outwards, resulting in less wrinkles.

Automatic Nozzle Recovery (ANR) System

The ink dropping status can be monitored and the heads will be cleaned whenever necessary, thereby reducing printing problems caused by clogged heads.

Toggle Switch

Conveyor Belt Mechanism

Cartridges can be replaced even during operation by using the automatic toggle switch.

Since the conveyor belt does not pull the fabric, printing stretchable materials is possible. This also has the effect of reducing fabric expansion/shrinking caused by ink absorbtion.

Ink System

Overnight operation and printing for long periods of time are possible with two sets of 1,000cc cartridges for each colour. Conventional 220cc cartridges of the Tx2-1600 can also be used if desired.