DGS Mimaki - TX3 direct to textile printer specifications

printers

cutters

software

consumables

laminators

heat units

filters

FAQs

downloads

JV33

CJV30

JV5

UJF-3042

UJF-706

UJF

UJV

JFX

TX2

TX3

GP-604D

Item		Tx3-1600
Print head	Method	Piezo-electric drop-on demand
	Configuration	180dpi x 360 nozzles x 8 colours
	Head height adjustment	1.3mm (0.05") to 10mm (0.39") from belt surface
Maximum printing width		1620mm (64")
Print mode *1	Pass	2/3/4/6/8/12/16
	Direction	Bi/Uni directional
	Scan Speed	Normal / High
	Resolutions	720 x 720, 360 x 720, 360 x 540, 360 x 360 (dpi)
Perpendicularity		±0.5mm/1000m (±0.02"/39.4")
Inks	Type	Reactive Dye / Acid Dye
	Supply	Double cartridge automatic switching & intermediate tank
	Capacity	Max. 1,000cc x 2 + 40cc (approx. 2.2kg (4.9lbs))
Fabric skew		5mm / 10m or less (0.2" / 393.7" or less): in case of cloth roll left / right edge winding displacement of 5mm (0.2") or less
Fabric skew
Usable fabrics*2	Width	200mm to 1,650mm (approx.8" to 65"
	External Diameter	Ø270mm (Ø10.6") or less
	Weight	38kg (83.8lbs) or less
	Settable paper tube	Ø50mm to Ø79mm (Ø2" to Ø3"), left / rignt reference position changeable
	Printing Face	Face-in / Face-Out
Printing	Effective area	1,620mm (64")
Interface		IEEE-1284 / IEEE-1394
Safety standards		VCCI Class A, FCC Class A / UL 60950 CE markings (EMC, low voltage directive) / CB report
Power	Body	AC100 V to 240V±10% (auto voltage) 50/60 Hz ±1 Hz
	Heater	AC100v to 120V / 200V to 240V±10% (switchable) 50/60 Hz ±1 Hz
	Blower	AC100V to 120V or AC200V to 240V±10% (factory preset) 50/60 Hz ±1 Hz
Power consumption	Body	6A or less (AC 100V) / 3A or less (AC 200V)
	Heater	12A or less (AC 100V) / 6.5A or less (AC 225V)
	Blower	5.5A or less (AC 100V) / 3A or less (AC 220V)
Operational Environment		Temperature: 15°C (59°F) to 30°C (86°F) Humidity: 35% to 65%Rh (no condensation)
Accuracy Guarantee Temp.		18°C(64°F) to 25°C(77°F)
Dust		Office Level
Dimentions		W=2,750mm (108") x D=710mm (28") x H=1,320mm (52")
Weight		Less than 150Kg(330lbs)

*1: Some combination of Pass, Direction, Scan Speed, Resolutions are not supported
*2: The following types of fabric cannot be used.
- Fabrics that do not wind well
- Fabrics with considerable moisture-related expansion/shrinking
- Fabrics with a lage gummed portioned that sags
- Fabrics that sag in the middle portion
- Fabrics with a narrow weave
- Particularly hard fabrics
- Fabrics that are twisted due to improper pre-processing
Fabrics require pre-processing for inkjet printing before printing, as well as post-processing
such as steam and washing after printing

• Ink cartridges

Acid dye inks
Colour	220cc (0.24kg)	1,000cc (1.1kg)
Black	SPC-0355K	SPC-0392K
Cyan	SPC-0355C	SPC-0392C
Magenta	SPC-0355M	SPC-0392M
Yellow	SPC-0355Y	SPC-0392Y
Light Magenta	SPC-0355LM	SPC-0392LM
Light Cyan	SPC-0355LC	SPC-0392LC
Grey	SPC-0355GR	SPC-0392GR
Blue	SPC-0355BL	SPC-0392BL
Red	SPC-0355R	SPC-0392R

Reactive dye inks
Colour	220cc (0.24kg)	1,000cc (1.1kg)
Black	SPC-0357K	SPC-0393K
Cyan	SPC-0357C	SPC-0393C
Magenta	SPC-0357M	SPC-0393M
Yellow	SPC-0357Y	SPC-0393Y
Light Magenta	SPC-0357LM	SPC-0393LM
Light Cyan	SPC-0357LC	SPC-0393LC
Grey	SPC-0357GR	SPC-0393GR
Blue	SPC-0357BL	SPC-0393BL
Orange	SPC-0357OR	SPC-0393OR
Red	SPC-0357R	SPC-0393R
Golden Yellow	SPC-0357GY	SPC-0393GY

• Printing speeds

Printing: sq/m per hour
DPI	High	Standard	Fine
360 x 360	27	15	8.1
360 x 540	19.3	10.4	5.4
720 x 720	10	5.5	2.7
8-colour mode: Printing speed for a printing width of 1,600mm and Bi-directional printing. The printing resolution and printing speed may be restricted by the type of fabric and the pre-processing status. The more narrow the printing width, the longer the printing time, even for the same printing area.