DGS Mimakk _ Tx400

printers

cutters

software

laminators

heat units

filters

FAQs

downloads

JV33

CJV30

JV5

JV400LX

UJF-3042FX

UJF-706

UJF

UJV

JFXplus

TX400

TX3

GP-604D

Digital workflow

Substantial time savings and production time reduction from design to market enables fast response to clients orders.
No restriction in numbers of colours smooth gradations and high quality printing.
Ecologically viable printing as only the requires ink quantity is used for production. No excess water usage.

High quality print - different drop sizes

Ink drop sizes can be selected according to the substrate and the intended design so that sharp and exact reproduction is made possible.
Due to ink drops having different appearances on different substrates, test before hand and chose the appropriate drop size for each substrate.

Colour modes and variations

Ink correspondence chart

D/B model correspondence chart

	Tx400-1800D	Tx400-1800B	Corresponding Ink
Textile Printing			Sb200/Rc200/Ac200
Textile printing: wet stretchable substrates			Sb200/Rc200/Ac200
Direct Sublimation			Sb200
Transfer Sublimation			Sb200

Continuous print - Ink supply

Bulk ink system 16 loading slots for 2L ink container each, therefore in 4 colour mode a maximum of 8L per colour is available.

UISS (Uniterrupted Ink Supply System) Mimaki's UISS (Uniterrupted Ink Supply System) will automatically switch whenever one ink container is empty to the other ink container of the same colour. in addition, operators can exchange the ink containers even when the printer is at work. Therefore the UISS enables long continuous print runs.
		Empty ink containers are automatically switched and ink supply starts from the 2nd container of the same colour

Continuous print - Media transport system

Tx400 - 1800D
Direct printing	Transfer sublimation printing

Web tension is ensured by movable delivery/retraction bars that absorb tension differences and stablize substrates so that high quality printing is made possible.	Setting the transfer spacer at the platen and displacing the free roller on the low position, the media will be sloped, reducing media wrinkles.
Tx400 - 1800B
Belt carrier system enables conveying of stretch materials

Belt encoder revision function
Uneven conveying of textile substrates can be counteracted by employing the belt encoder revision function. As the connection part of the belt shows a difference in thickness of 0.1 - 0.2mm, without the belt encoder, this unevenness will usually impact long prints causing the issue to increase. In order to ensure high quality printing the belt encoder revision functionality should be used.

Speed chart

RasterLink Pro5 TA Rip software

	New generation 16-bit rendering software included
Tx400-1800's broad functionality is fully supported by this advanced software RIP
• 16 bit rendering enables smooth gradations • Ink drop size can be selected from the RIP • Corresponds to colour chart for easy colour matching • Automatically changes between CMYK mode and BMYK mode depending on the selected profile •Easily achieves both software updates and profile download via web update function.
[ 8 bit rendering ] Tone jump is likely to occur in gradation.		[ 16 bit rendering ] Smooth gradation without tone jump