Item
Specifications
Print head Piezo-electric drop-on demand
Resolution 600 dpi, 1200 dpi
Ink Kind UV-curable flexible ink (4 colour: C, M, Y, K)
Capacity 880 cc (440 cc x 2 cartridge)/colour
Max. printing width Roll: 1,610 mm ( 63.3"), Ridig: 1,600 mm (63.0")
Media Width 1,620 mm (63.7")
Thickness Max. 10 mm (0.39")
Weight Roll: less than 25kg (55 lbs.)
Rigid: less than 2kg (4.4 lbs.)
Roll diameter Inside: 2 inch, 3 inch / Outside: Less than Ø 180mm (7.1")
Media Cutting Cut by hand
UV device Equiped with two UV LED lamp
Media Heater Pre/print heater
Media take-up device Roll take-up device (Standard), inside/outside selectable
Interface USB2.0
Applicable standard VCCI class A, UL60950-1, FCCI class A,
CE marking (EMC directive, low voltage directive) CB report, RoHS
Power AC100V~120V, 200~240V±10%, 50•60Hz±1Hz, less than 1.68KVA
Power consumption 3.3kVA or less (main unit 0.5kVA, UV device 1.8kVA, heater 1kVA)
Operational Environment 15ºC~30ºC, 35~65%Rh (No condensation)
Dimentions(WxDxH) Main Unit 3,300mm x 780mm x 1,290mm (129.9" x 19.8" x 50.7")
Main Unit + Main Stand 3,300mm x 4,300mm x 1,290mm(129.9" x 169.3" x 50.7")
(Main unit and table with support wire)
Weight Main Unit 260kg (573 lbs.)
Media tbale 50Kg (110 lbs.) x 2 units
Item
Item No.
Remarks
LF-200 Flexible UV ink Cyan
SPC-0558C
440cc cartridges
Magenta
SPC-0558M
Yellow
SPC-0558Y
Black
SPC-0558K
Max. printing width
SPC-0516FS
Ink Performance of materials

• Post- printing ink property performance (adhesion, weather durability, etc.) varies according to the material.
• If printing materials other than those described are to be used, please testthe materials first.
• Adhesion performance differs according to the material. There are cases in where a binder compound may be nesessary.

printers | cutters | software | consumables | laminators | heat units | filters | FAQs | downloads | register | contact us
©Copyright 2009 DGS Mimaki